Fiber construction often moves quickly, but the work becomes much more sensitive anywhere a bore, trench, handhole, cabinet, or conduit crosses existing underground utilities. Your Local Pro Hydrovac provides fiber optic excavation for contractors and project teams that need controlled soil removal around buried infrastructure.
Hydrovac can support several stages of a fiber project. Common requests include potholing crossings before horizontal directional drilling, exposing existing conduit, creating access for handholes or splice locations, preparing bore entry and exit areas, and opening precise work zones for repairs or upgrades.
Before dispatch, share the project address, route or station information, locate status, planned bore path, expected depth, access limits, hose distance, and requested excavation dimensions. Fiber crews should also identify any schedule windows, traffic-control requirements, disposal expectations, or site-specific safety procedures.
On larger fiber builds, the hydrovac scope may be repeated at many crossings along the same route. A numbered pothole list, station references, or marked plan can reduce confusion when several crews are working at once. If restoration, backfill, or surface repair belongs to another contractor, that responsibility should also be clear before the excavation starts.
For repair work, describe whether the crew needs only visual exposure or enough space to handle conduit, cable, splice hardware, or a replacement section. That distinction changes the excavation size and the amount of material the vacuum truck must manage.
Our Fiber Optic Excavation Process
A typical hydrovac visit may include:
- Review the work area, drawings, locate marks, and requested excavation points.
- Confirm truck placement, hose routing, pedestrian or traffic restrictions, and spoil handling.
- Set up the excavation area and protect nearby facilities or finished surfaces as required.
- Use controlled water and vacuum excavation to remove soil at the approved locations.
- Expose the crossing, conduit, handhole area, or bore location needed by the fiber crew.
- Review the excavation with the project contact and leave the area ready for the next phase.
The excavation scope should match the actual construction step. A crossing verification hole does not need the same working space as a splice pit or bore entry area. Defining the dimensions before work begins helps the hydrovac crew arrive with the right setup and keeps the excavation focused.
Need Fiber Optic Excavation? Call 888-907-6390
- Jay Hill
Zero stress, zero problems, and they even followed up to make sure i was happy. Like, who does that anymore? Totally recommend these guys.
- Kelly Richards
Amazing service!! I’ve used a lot of companies in the past, but these folks are on another level. Friendly, efficient, and they really know what they’re doing.
Hydrovac Support for Fiber Projects
Fiber work is often performed in crowded rights-of-way where power, gas, water, sewer, communications, and other facilities may already be present. Hydrovac gives contractors a way to expose selected areas before mechanical excavation or boring continues.
- Utility Crossings: Daylight marked utilities along a proposed fiber route so the field crew can confirm depth and position.
- HDD Support: Prepare potholes and access areas that help directional drilling crews plan and verify underground crossings.
- Handholes & Splice Areas: Excavate controlled spaces for vaults, handholes, cabinets, splice access, or repair work.
- Existing Fiber Exposure: Carefully remove soil around buried communications infrastructure when access is needed for inspection, repair, or upgrades.
Request Fiber Optic Hydrovac Service
If your fiber project needs utility daylighting, bore support, access excavation, or controlled digging around existing infrastructure, contact Your Local Pro Hydrovac. Provide the project scope and excavation points so the local provider can confirm availability, truck access, disposal, and scheduling.